Controls And Functions / Connections - Zoom 606 Guitar Operation Manual

Controls and Functions / Connections

Top Panel
Display
Shows various information
necessary for operation of the
606, such as patch number,
parameter settings, etc.
DRIVE LED
Indicates the on/off status of
the DRIVE module.
DRIVE selector
Selects the distortion (effect
type) used in the DRIVE
module.
GAIN [+] / [-] keys
Adjust the DRIVE module
distortion intensity and gain.
[W] / [Q] foot switches
These switches let you select patches,
operate the tuner function, etc.
Rear Panel
INPUT jack
Connect the guitar to this jack.
When the 606 is operated on
battery power, the jack also serves
as on/off switch. Plugging a cable
into the jack turns the unit on.
DC 9V (AC adapter) jack
The dedicated AC adapter AD-0006 (9 V DC, 300 mA, center minus)
can be connected here. Connecting the adapter here turns the unit on.
6 ZOOM 606
GUITAR
Controls and Functions / Connections
STORE key
Serves for storing an edited patch or
copying an existing patch to another
location.
PEDAL ASSIGN key
Selects the module to be controlled by
the expression pedal.
PEDAL ASSIGN LEDs
Indicate which module is being
controlled by the expression pedal.
PLAY/EDIT selector
Switches between play mode and edit
mode and also serves to select the
module for editing.
Expression pedal
Serves to adjust the intensity or level of a
specific module in real time. The pedal
VALUE [+] / [-] keys
also incorporates an on/off switch for
Serve for adjusting settings,
modules.
switching banks, etc.
OUTPUT jack
This jack is used for conection to a guitar amplifier
or a pair of stereo headphones. A Y-splitter cable
can also be used in this jack to conect the 606 to
two amplifiers.
ZOOM 606 7
GUITAR