Zoom 606 Guitar Operation Manual page 16

Effect Parameters
CONTOUR
EQ module extended parameters
These parameters serve to adjust the effect
operation for the effect type selected with the EQ
module basic parameters.
CONTOUR (Contour)
Using the 0 value as a reference (flat setting), negative values cause an
increasing boost in the low range and positive values cause an
increasing boost in the high range. When the EQ module is On, this
parameter is always active. Check this parameter if the 4-band EQ effect
type setting does not seem to produce the desired results.
(Off
indication)
ZNR/AMP
ZNR/AMP module
This module comprises ZNR (ZOOM Noise
Reduction) for reducing noise during play pauses
or silent passages, and an amp simulator which
simulates the sound of various guitar amplifiers.
Use the VALUE [+] / [-] keys to adjust the ZNR
threshold or select the type of amplifier.
ZNR
0 1
ZNR (ZOOM Noise Reduction) serves for reducing noise during play
pauses or silent passages. Higher setting values result in more efficient
noise reduction. Set the value as high as possible without causing the
5 9
sound to be cut off unnaturally.
COMBO
C 1
Simulates a combo type amplifier. When this setting is selected, the amp
simulator is on and ZNR is off.
C 2
ZNR + COMBO
ZNR and combo amp simulator are both on. Increasing the right-digit
C 9
value results in more efficient noise reduction.
30 ZOOM 606
GUITAR
CONTOUR ZNR/AMP
Effect Parameters
BRIGHT COMBO
b 1
Simulates a bright sounding combo type amplifier. When this setting is
selected, the amp simulator is on and ZNR is off.
b 2
ZNR + BRIGHT COMBO
ZNR and bright combo amp simulator are both on. Increasing the right-
b 9
digit value results in more efficient noise reduction.
STACK
S 1
Simulates a stack type guitar amplifier. When this setting is selected, the
amp simulator is on and ZNR is off.
S 2 ZNR + STACK
ZNR and stack amp simulator are both on. Increasing the right-digit value
S 9 results in more efficient noise reduction.
OFF
o F
The ZNR/AMP module is off.
MOD/PITCH
MOD/PITCH module
This module comprises modulation effects such as
chorus and flanger, as well as a pitch shifter. Use
the VALUE [+] / [-] keys to select the effect type
and adjust the effect intensity.
CHORUS (Chorus)
This effect mixes a variable pitch-shifted component to the original signal,
resulting in full-bodied and expansive sound. Higher setting values result
in a more pronounced chorus effect.
PITCH
+
Original sound
0
-
Adjusts the depth of the effect.
ZNR/AMP MOD/PITCH
PITCH
Effect sound
(left channel)
+
0
-
TIME
PITCH
Effect sound (right channel)
+
0
-
ZOOM 606
GUITAR
TIME
TIME
31