Zoom 606 Guitar Operation Manual page 19

Effect Parameters
PEDAL PITCH shift range
Pedal fully raised
L1 0 cent
L2 0 cent
L3 0 cent
L4 0 cent
L5 0 cent
L6 +1 octave + original sound
L7 -700 cent (7 semitones down)
+ original sound
L8 - (0 Hz) + original sound
L9 - (0 Hz) + original sound
OFF (Off)
Turns the MOD/PITCH module off.
DLY/REV
DLY/REV module (basic parameters)
This module comprises delay and reverb effects.
Use the VALUE [+] / [-] keys to select the effect
type and adjust the effect intensity.
Adjusts the ratio between original and effect sound
(common to all effect types in the DLY/REV
module).
DELAY (Delay)
This is a conventional digital delay effect.
By using the output in stereo, you can
d 1
achieve a ping-pong delay where the delay
sound alternates between the left and right
channels. The right-digit setting values
d 9
control the feedback (number of
repetitions) and the mixing ratio between
original sound and effect sound.
36 ZOOM 606
GUITAR
MOD/PITCH DLY/REV
Pedal fully pushed down
-100 cent (semitone down)
+1 octave
+2 octaves
-1 octave
-2 octaves
-1 octave + original sound
+500 cent (5 semitones down)
+ original sound
+1 octave
+1 octave + original sound
LEVEL
Original sound
Delay sound
TIME
Delay time
Effect Parameters
ECHO (Echo)
E 1
This is a delay effect with a warm sound similar to a tape echo. By using
the output in stereo, you can achieve a ping-pong delay where the delay
E 9 sound alternates between the left and right channels. The right-digit setting
values control the feedback (number of repetitions) and the mixing ratio
between original sound and effect sound.
H 1 HALL (Hall)
This is a reverb effect that produces a sound similar to the reverberation in
H 9
a concert hall. Higher right-digit setting values result in stronger reverb.
ROOM (Room)
r 1
This is a reverb effect that simulates the reverberation in a room. Higher
r 9 right-digit setting values result in stronger reverb.
OFF (Off)
o F
Turns the DLY/REV module off.
TIME
DLY/REV module (extended parameters)
These parameters serve to adjust the delay time or
reverb time for the effect type selected with the
DLY/REV module basic parameters.
The parameters are linked to the DLY/REV module
and are off when the DLY/REV module is off.
DELAY TIME (Delay Time)
(When DELAY or ECHO is selected as effect type)
Sets the delay time in the range from 1 - 37. The actual delay time is the
setting value x 10 (ms). (Example: A setting of "15" results in a delay time
of 150 ms.)
REVERB TIME (Reverb Time)
(When HALL or ROOM is selected as effect type)
Sets the reverb time in the range from 1 - 10. Higher right-digit setting
values result in longer reverb time.
(Off
indication)
DLY/REV TIME
ZOOM 606 37
GUITAR