Setting Focus - Vivitar ViviCam 5388 Owner's Manual

S_"ting Focus
Images can be captured with the focus determined automatically using auto focus. You may over-ride the
auto focus and specify [_I_] macro or [_,] infinity.
1. Rotate the mode dial to _, p, _, _iL, _, or JR.
2. Press the power switch to turn on the power.
3. Press the four-way controller (IP,/_,_). The focus mode changes
each time the button is pressed. You can also change the setting
using four-way controller (AV).
4. Press the OK button to confirm the setting.
5. Compose your scene and press the shutter release button.
The camera has three focus modes: Standard, Macro and infinity.
The table below will help you choose the appropriate focus mode:
AF Standard Select Standard-focus setting for most occasions when you want the camera to
automatically determine the focus setting.When using Standard-focus setting,
any object at a range of focus is 40 cm or greater can be in focus.
_t_ Macro Select Macro-focus setting to capture close-up images. When the tens is zoomed
to its widest position you may focus on objects as close as 5 cm.When the lens is
zoomed to its telephoto position (3x zoom) you may focus on objects as close as
30 cm.
Infinity Select Infinity-focus setting when you want to capture an image of a subject at
infinity. The flash mode witl be set to Flash Off automatically.
EN-29