Using The Zoom Function - Vivitar ViviCam 5388 Owner's Manual

Using thG Zoom Function
This camera is equipped with 3x optical zoom. The tens moves during the optical zoom photography, allowing
you to capture telephoto and wide-angle shots. By using the optical zoom function; images appear closer by
pressing the _ button, or smaller away by pressing the _0 button.
The zoom bar indicates the current level of magnification. When the
digital zoom is within 3x magnification, the zoom bar is within the
optical zoom range. When the digital zoom function is set to On, you
can further enlarge the subjects with the 4x digital zoom by
continuously pressing the _ button. It is activated after your camera
reaches its maximum optical zoom factor (3x) and the zoom bar is
within the digital zoom area. You can enlarge the subject to a
maximum magnification equivalent to t2 times, however the more the
image is enlarged, the more pixetated the image will appear.
To capture a zoomed image, perform the following steps: Zoom bar
1. Rotate the mode dial to _, p, oo, ,_, i,_, or _'_ and turn your
camera on by pressing the power switch.
2. Adjust the magnification ratio by using the _/_ button.
• To exit zoom photography, press and hold the _,_ button.
• The status of digital magnification is displayed on the LCD
monitor.
3. Compose your scene and press the shutter release button.
• To enable the digital zoom feature, set the [Mode2- Digital Zoom] to [On] in the _,
p, &, ,A, _, or_
mode.
(Refer to EN-67 for further details).
EN-27