Setting Up Record Functions; Switching Movie Quality (Video Mode) - Hitachi DZ-MV1000E Instruction Manual

Hide thumbs Also See for DZ-MV1000E:
Table of Contents

Advertisement

Setting Up Record Functions

SWITCHING MOVIE QUALITY (VIDEO MODE)

Choose the movie quality from "XTRA" (only with DVD-RAM disc), "FINE" and "STD".
It is recommended that you record critical subjects in the "XTRA" or "FINE" when you are using a DVD-
RAM disc, or in the "FINE" with a DVD-R disc. (P.28)
1
Press the MENU button,
choose "VIDEO Mode"
on the "Record
Functions Setup" menu
screen, and then press
the A button.
2
Choose the desired quality mode, and then
press the A button.
3
Press the MENU button to end the setting.
Movie quality
Block-like noise may appear in recorded image, or the outline of subject image is distored under the
recording conditions listed below: Pan the DVD video camera/recorder as slowly as possible. (Block
noise is likely to appear in the "STD"):
• If there is a complicated pattern in background (as in following figure on left)
• If the DVD video camera/recorder is moved excessively or quickly
• If subject is moving rapidly even when the DVD video camera/recorder is not moving
(Image when block-like noise occurs)
86
Note
Re c o r d F u nc t i on s S e t u p
V I DEO Mode
XTRA
OSD Ou t p u t
F I NE
STD
ENTER
RETURN
RAM
0 : 0 0 : 0 0
REM
3 0 MIN
8 : 0 0
FINE
3 0 /
9 / 2 0 0 5
:
The movie quality setting will be stored in memory even
when the DVD video camera/recorder is turned off.
The "VIDEO Mode" setting will not change even if the
DVD-RAM disc is replaced with a DVD-R disc, or vice
versa. However, the setting will switch to "FINE" in the
following case:
- When the mode is set to "XTRA" with a DVD-RAM disc
inserted and then the disc is replaced with a DVD-R
disc
When using DVD-R disc, you cannot switch the movie
quality while recording on the disc: The DVD video
camera/recorder will be automatically set to the movie
quality first used with the disc for recording.
The movie quality setting is effective only during movie
recording: The setting will not be displayed during
recording of stills.
(Image without block-like noise)
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents