Setting Up Record Functions; Switching Movie Quality (Video Mode) - Hitachi DZ-MV580E (SW) Instruction Manual

Setting Up Record Functions

SWITCHING MOVIE QUALITY (VIDEO MODE)

Choose the movie quality from "XTRA" (only with DVD-RAM disc), "FINE" and "STD".
It is recommended that you record critical subjects in the "XTRA" or "FINE" when you are using a DVD-
RAM disc, or in the "FINE" with a DVD-R disc. (P.32)
1
Press the MENU button,
choose "VIDEO Mode"
on the "Record
Functions Setup" menu
screen, and then press
the A button.
2
Choose the desired quality mode, and then
press the A button.
3
Press the MENU button to end the setting.
Movie quality
Note
Re c o r d F u nc t i on s S e t u p
•
V I DEO Mode XTRA
F I NE
I n p u t Sou r ce
•
OSD Ou t p u t STD
ENTER RETURN RAM
•
•
0 : 0 0 : 0 0
REM
3 0 MIN
8 : 0 0
FINE 3 0 / 9 / 2 0 0 4
:
The movie quality setting will be stored in memory even
when the DVD video camera/recorder is turned off.
The "VIDEO Mode" setting will not change even if the
DVD-RAM disc is replaced with a DVD-R disc, or vice
versa. However, the setting will switch to "FINE" in the
following case:
- When the mode is set to "XTRA" with a DVD-RAM disc
inserted and then the disc is replaced with a DVD-R
disc
When using DVD-R disc, you cannot switch the movie
quality while recording on the disc: The DVD video
camera/recorder will be automatically set to the movie
quality first used with the disc for recording.
The movie quality setting is effective only during movie
recording: The setting will not be displayed during
recording of stills.
12
99