Initialising Dvd-Ram Disc Or Card (Format Disc. Format Card) - Hitachi DZ-MV1000E Instruction Manual

INITIALISING DVD-RAM DISC OR CARD (FORMAT DISC. FORMAT CARD)

Before You Begin
1
Press the DISC NAVIGATION button.
2
Press the MENU button.
3
Choose "Format Disc" or "Format Card" on the
"Disc" or "Card" menu screen, and then press
the A button.
The screen for verifying "Format Disc" or
"Format Card" will appear.
4
Choose "YES", and then press the A button.
Choose "NO" to cancel initialisation.
F o rma t D i s c
A l l d a t a w i l l b e d e l e t e d .
F o rma t t h e d i s c now ?
YES NO
ENTER
(When using
DVD-RAM disc)
When initialising one side of the disc is
complete, the DVD video camera/recorder will
return to the recording pause status.
• Be sure to use the AC adapter/charger to power the DVD video camera/
recorder for initialisation. If the DVD video camera/recorder is turned off
during initialisation and the initialisation is interrupted, incorrect
initialisation will result and the incorrectly initialised disc will be unusable.
F o rma t Ca r d
A l l d a t a w i l l b e d e l e t e d .
F o rma t t h e ca r d now ?
YES NO
ENTER
(When using card)
:
Note
•
Initialisation will delete all the recorded contents on disc
or card: Be careful not to delete data by mistake.
•
Be sure to use the AC adapter/charger when initialising
disc or card so that the DVD video camera/recorder is
not turned off midway. If initialisation is interrupted by
power off, the disc or card will not be initialised correctly,
or it may be damaged.
•
It may not be possible to initialise a disc with many
scratches or dirt: Such a disc cannot be used (P.76).
•
If you use a brand-new DVD-R disc, message "Disc is
not formatted" will appear: initialise the disc, following
the subsequent messages (P.42).
•
This DVD video camera/recorder may not recognise
some discs or cards that have been initialised on PC or
a device other than this DVD video camera/recorder.
•
If you attempt to initialise a disc or card in this DVD video
camera/recorder when it is connected to PC via PC
connection cable, the disc or card may not be initialised
and may be unusable on this DVD video camera/
recorder.
13
123