EverFocus ED200E Operation Instructions Manual page 7

Everfocus color dome camera operation instructions
Hide thumbs Also See for ED200E:
Table of Contents

Advertisement

ADJUSTMENT
FL (Flickerless)
When picture flicker fiercely, turn FL on, then
the camera will stabilize the speed of electronic
shutter at 1/100(S)(NTSC) or 1/120(S)(PAL)
automatically, and reduce the flicker immediately.
The default setting is OFF.
Mirror
Mirror ON: Set a horizontal image inversion.
Mirror OFF: Disable the inversion.
Auto Gain Control Adjustment
AGC ON: The sensitivity increases automatically when the light is low.
AGC OFF: A-low-noise picture is obtained when camera is under a low light condition.
D/N (Day/Night)
D/N ON: When light environment is under 5 Lux, the camera will switch to black and white mode.
However, when light environment is over 10 Lux, the camera will switch to color mode.
Please be informed that any D/N switch will result a delay of 4~5 seconds.
D/N OFF: Camera stays in color mode.
Note: when AGC setting is OFF, then D/N function will be inactive.
Level Volume Control (for vari-focal lens only)
The iris level of lens can be adjusted by the level control. Turn the level control to the right
direction (H) and video images will become brighter. Turn the level control to the left direction (L)
and the video images will become darker.
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ed300e

Table of Contents