Table of Contents
Advertisement
○
Camera Cover
1
This cover will protect the camera for avoiding dust and damage.
○
Lens
2
This vari-focal Lens allows users to adjust the Zoom and Focus manually.
Built-in fixed lens: 3.6; 4.3; 6.0 or 8.0 mm
○
Base
3
The camera unit sets in the dome base, when it is shipping from the factory.
○
Focus Ring (for vari-focal lens only)
4
To set the focus, and loosen the Focus ring knob, please turn the ring toward <F> or <N> if
necessary.
○
Zoom Ring (for vari-focal lens only)
5
If you like to adjust the viewing range, please loosen or tighten the Zoom ring. Turn the ring
towards <W> for Zoom out or <T> for Zoom in. When camera setting is finished, please
tighten the zoom ring knob.
○
Flickerless
6
The factory setting is FL OFF.
○
Mirror
7
The factory setting is Mirror OFF.
○
Auto Gain control on/off switch
8
The factory setting is AGC ON.
○
D/N
9
The factory setting is D/N OFF.
○
Monitor Test Pin
10
For monitor use. When setting up the camera, connect a monitor to this video output pin and
to the GROUND pin using alligator clip cables, then use the image displayed on the monitor,
set the surveillance angle.
○
Level Volume Control (for vari-focal lens only)
11
The iris level control for the lens.
3
Advertisement
Table of Contents
