Recording At Close Range (Macro Recording) - Hitachi DZ-BD70E Instruction Manual

Hint
You can also use the remote
control for changing the maximum
digital value. Each press of
DIGITAL ZOOM switches the
"Digital Zoom" setting as follows;
→ " " → "
Off 40x
" "
Notes
• When operating the zoom lever,
the focus may blur for a moment.
• When digital zoom is added, the
image quality will become
coarser.
• When using a card (recording
stills), the digital zoom cannot be
set.
500x
"
HDD BD-R RAM -RW (VR)
BD-RE
Recording at Close
Range
(Macro Recording)
When you record a small subject at
close range, you can bring the lens
surface as close as approx. 2 cm to the
subject. This will allow you to enlarge
the subject to cover the entire screen.
Recording at close range
During recording pause or recording,
point the camcorder at the subject
and push the zoom lever toward the
W side until the wide-angle is
1
maximized.
• Recording up close may
require more lighting. If the
screen is dark, direct a light
source at the subject.
Note
Although the zoom can be used, the
focus may become blurred
depending on the distance to the
subject.
-RW (VF) R +RW CARD
71