Table of Contents
Advertisement
Choose a scene by pressing
/
(left/right).
• Holding down the button will increase the scene selection speed. Use the
"Current scene number/Total number of scenes" display and the bar graph as
reference.
Press the confirmation button.
The chosen scene is played back.
Playback is paused at the final frame of the last scene, and " " (playback pause
icon at the final frame) appears. When this condition continues for longer than
five minutes, the display will automatically return to the disc navigation screen.
• To promptly return to the disc navigation screen, press
NAVIGATION.
To return to recording pause mode, press
• If you press the confirmation button while " " is displayed, playback starts
from the first scene.
BD-R RAM -RW (VR)
HDD
BD-RE
Choosing and playing back multiple scenes
After step
of "Choosing and playing back a scene" (p.56), perform procedures
according to your purpose from the table below. When you have finished choosing
scenes, press the confirmation button to begin playing them back.
• You can utilise more than one method in the table below when choosing scenes.
• The colour of the frame(s) may change depending on your operations as follows:
– Yellow: indicates your current position (cursor frame)
– Red: indicates scenes already chosen
– Blue: indicates the range of consecutive scenes being selected
– 2-colour frame: includes the meaning of both colours
Select multiple scenes
individually
Using the current scene as
your starting point, select
multiple previous or
succeeding consecutive
scenes
/
(up/down, previous page/following page) and
-RW (VF)
R +RW
CARD
Select a scene by pressing
then press SELECT.
Repeat this step to choose the next scene.
Press and hold SELECT until the cursor frame
becomes blue.
Choose a final scene by pressing
then press the confirmation button to confirm the
setting.
or DISC
or DISC NAVIGATION again.
/
/
/
/
,
/
/
,
57
Advertisement
Table of Contents
