Overview; Figure 1 : Top View Of Power Chassis With Power Rectifiers Installed - Panduit DPOE PN380C User Manual

Power system
Table of Contents

Advertisement

DP
E™ Power System User Manual
O

OVERVIEW

The DP
E™ Power Patch Panels and the DP
O
effective solution for Power over Ethernet (PoE) applications, complaint with the IEEE 802.3af-2003
specifications or the alternate PoE (Cisco Legacy) specifications. These DP
Systems allow centralized powering of network devices, such as Voice over Internet Protocol-based
(VoIP) telephones, IP security and surveillance cameras, or wireless access point (WAP) devices, over
the same cabling used to send data. DP
1RU height.
The DP
E™ Power over Ethernet Systems may be powered individually using a DP
O
(PANDUIT part # DPOEPWRB120Y), which delivers 120 watts at 48 Volts of Direct Current (VDC) to a
single DP
E™ Power Patch Panel or DP
O
enough power to support all the Powered Devices (PD) connected to the panel or powered midspan. In
these cases, or in cases of multiple DP
often required. One option is to use the DP
referred to as the DP
E™ Power System.
O
The DP
E™ Power System uses a modular design to supply power at 48 VDC to DP
O
Ethernet Systems. The DP
which can accommodate up to three rectifiers (500 or 1250 watt rectifiers), depending on the current and
future power requirements for the DP

Figure 1 : Top View of Power Chassis with Power Rectifiers Installed

The DP
E™ Power System accepts an Alternating Current Voltage (VAC) between 100 and 240 VAC
O
(47 to 63 Hz) and produces a regulated output of 42 - 56 VDC capable of delivering a max of 10 Amperes
(A) of Direct Current (DC) in an ambient operating temperature range of -40° Celsius (C) to +70° C per
output channel.
E™ Compact 8 Midspan provide a reliable and cost-
O
E™ Power over Ethernet Systems fit into 19" racks and occupy
O
E™ Compact 8 Midspan. However, 120 watts may not be
O
E™ Power over Ethernet Systems, a larger power system is
O
E™ Power System Chassis with Power Rectifiers, herein
O
E™ Power System consists of a chassis (PANDUIT part # DPOEPWRCU),
O
E™ Power over Ethernet Systems being used.
O
1
Part Number: PN380C
E™ Power over Ethernet
O
E™ Power Supply
O
E™ Power over
O

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dpoe

Table of Contents