Lcd Module Reassembly Procedure; Replacing The Antennas, Power Board, And Mic - Packard Bell EasyNote LJ77 Service Manual

LCD Module Reassembly Procedure

Replacing the Antennas, Power Board, and MIC

1. Replace the left and right antennas as shown. Ensure that the locating pin on each antenna is correctly
seated. Press down on the adhesive pads (green callout) to secure the antennas in place.
2. Replace the left antenna cable (white) as shown. Ensure that the cable is inserted along the cable channel
and secured under each adhesive tab strip.
106
Locating Pin
Locating Pin
Chapter 3