Rack Mounting - QSC CMX2000V User Manual

Unpacking
Factory packed carton contains:
• CMX amplifier
• User's manual
• Adhesive rubber feet (for non-rack mount applications)
• Attenuation security plate
• Rear rack ear mounting kit
• IEC-type detachable power cord
Use the same type carton when shipping the amplifier.

Rack Mounting

Use four screws and washers to mount the amplifier to the equipment rack rails. To use the amplifier outside a rack, attach the self-adhesive rubber
feet to the bottom. Use the rear rack ear support kit to support the rear of the amplifier for portable use. Refer to
vertical centerline of holes is 0.40" (10.2 cm)
from back edge
hole size = 0.25" x 0.47" (06.4 x 11.9 mm)
3.00" (7.6 cm)
2.25" (5.7 cm)
notch is 0.40" high x 0.50"
deep (1.0 x 1.2 cm)
17.40" (442 mm)
2.60" (66 mm)
— Figure 2 —
4
(Figure 2) for planning.
15.8" (402 mm)
14.8" (375 mm)
2.25" (57 mm)
18.90" (482 mm)
5.2" (132 mm)