GE GSW25LSTESS Owner's Manual And Installation page 14

About the crispersand pans.
Not all features are on all models.
Fruit and Vegetable Crispers
Excess water that may accumulate in the
bottom of the (h'awe_ should be wiped (hy:
On some models the bottom drawer has
a cover that slides back as the drawer is opened.
This allows flfll access to the (h'awe_: _&sthe
drawer is closed, the cover will slide torward
into its original position.
tIUM|D|'rYCON T ROL
Adjustable Humidity Crispers
Slide the control all the way to the J
(high) setting to provide high lmmidi_'
recommended tot most vegetables.
Slide the control all the wax to the _) (low)
settiw*,_ to proxide lower humidi_ lexels
recommended fi)r most fl'uits.
Convertible Meat Pan
The convertible meat pan has its own cold air
duct to allow a stream ot cold air fl'om the
fl'eezer compartment to flow to the pan.
The variable temperature control regulates
the
air flow fl'om the Climate Keel)er.
TM
Set the control to the _ (coldest) setfim* to
store fresh Illeats.
Set the control to _ (cold) to convert the
pan to nomml retiigerator temperature and
provide extra vegetable storage space. The coM
air (hlct is ttlrned off'. Variable settings between
these extremes can be selected.
About crisper removal
Not all features are on all models.
14
Crisper Removal
The top ('fisl)e_ can easily be removed by
pulling the drawer straight out and lifting
the drawer up and over the step location.
If the door prevents you fl'oin taking out the
drawe_, fi_t t_w to remove the door bins.
If this does not offer enough clearance, the
refl_igerator will need to be rolled torward tmtil
the door opens enough to slide the (h'awet_
out. In some cases, when you roll the
refl_igerator out, you will need to move the
refrigerator to the lett or fight as vou roll it out.
Toremove the bottom crisper:
Pull the drawer out to the stop position.
0 Rotate all tom" _swim,_locks to the tmlock
position.
0 I,ifl the fl'ont oI the drawer
up and out.
Toreplace the bottom crisper:
Make sm'e all tom" ,swin,,_locks are in the
tmlock position.
Place the sides of the drawer into the
drawer SUl)ports, making sm'e the swing
locks fit on the drawer slots.
I,ock all ti_tu" swing locks by rotating them
to the lock position.
!