Assembly; Unpacking; Packing List - Craftsman nextec 320.10003 Operator's Manual

WARNING: The safe use of this product requires an understanding of the
information on the tool and in this operator's manual, as well as knowledge of
the project you are attempting. Before use of this product, familiarize yourself
with all operating features and safety rules.
ADJUSTABLE TORQUE
The Drill has a 18-position clutch.
TWO-SPEED GEARBOX
The two-speed gearbox is designed for drilling or driving at LO or HI speeds. A
slide switch is located on top of your Drill for selecting the appropriate speed.
VARIABLE SPEED
The variable-speed trigger switch delivers higher speed with increased trigger
pressure and lower speed with decreased trigger pressure.
KEYLESS CHUCK
The keyless chuck allows you to hand-tighten or release the Drill bit in the
chuck jaws.
FORWARD/REVERSE/CENTER LOCK
The Drill has a direction-of-rotation selector located above the trigger switch for
changing the direction of bit rotation. Setting the trigger switch in the OFF (center
lock) position helps reduce the possibility of accidental starting when not in use.
LED WORKLIGHT
The LED worklight, located on the front of the drill, illuminates when the trigger
switch is depressed. This feature provides extra light for increased visibility.
,_ WARNING: If any parts are broken or missing, do not attempt to plug in the
power cord or operate the drill until the broken or missing parts are replaced.
Failure to do so could result in possible serious injury.
WARNING: Do not attempt to modify this drill or create accessories not
recommended for use with this drill. Any such alteration or modification is misuse
and could result in a hazardous condition leading to possible serious injury.
,_ WARNING: To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the drill when assembling parts.
UNPACKING
This product has been shipped completely assembled.
= Carefully remove the tool and any accessories from the box. Make sure that
all items listed in the packing list are included.
= Inspect the tool carefully to make sure no breakage or damage occurred dur-
ing shipping.
= Do not discard the packing material until you have carefully inspected and
satisfactorily operated the tool.
= If any parts are damaged or missing, please refer to the numbers listed on
the back page of operator's manual.
PACKING LIST
Drill, Double-ended Bit, Operator's manual.
10003 ManuaLRevised_08 0724 Page 14 10003 ManuaLRevised_08 0724 Page 15