Craftsman 320.17217 Operator's Manual

Craftsman 320.17217 Operator's Manual

3/8" keyless drill

Advertisement

Operator's
Manual
j CRRFTSMRH°j
evolv M
3/8" Keyless Drill
Model No. 320.17217
000s
WARNING:
To reduce
the risk of
injury, the user must read and
understand
the Operator's
Manual
before
using this product.
• WARRANTY
SAFETY
ASSEMBLY
DESCRIPTION
OPERATION
MAINTENANCE
Sears Brands
Management
Corporation
www.craftsman.com

Advertisement

Table of Contents
loading

Summary of Contents for Craftsman 320.17217

  • Page 1 Operator's Manual j CRRFTSMRH°j evolv M 3/8" Keyless Drill Model No. 320.17217 WARNING: To reduce injury, the user must read and understand the Operator's before using this product. Sears Brands Management www.craftsman.com • WARRANTY the risk of SAFETY ASSEMBLY Manual...
  • Page 2 Sears Repair Parts Phone Number CRAFTSMAN@ EVOLV FULL WARRANTY If this Craftsman@ Evolv product fails due to a defect in material or workmanship within one year from the date of purchase, return it to any Sears store or other Craftsman@ Evolv outlet in the United States for free replacement.
  • Page 3: Safety I Nstructions

    We recommend a Wide Vision Safety Mask for use over eyeglasses or standard available at Sears Stores or other Craftsman Always use eye protection ANSI Z87.1 your careful do not, by themselves, they give are no substitutes all safety instructions "WARNING,"...
  • Page 4: Work Area Safety

    WARNING: Be sure to read and understand before using the drill. Failure to follow all instructions radiation exposure, electric shock, fire, and/or serious personal injury. WARNING: Do not attempt read all instructions, safety rules, and warnings. result in fire, electric shock, or serious personal injury. Save the manual and refer to it frequently.
  • Page 5 When indoubt, u sethenextheavier gauge. Always useULandCSA listed extension cords. Recommended sizes of extension Ampere Rating More Than Not More Than PERSONAL SAFETY Stay alert, watch operating a power tool. Do not use tool while tired influence of drugs, operating power tools may result in serious personal injury.
  • Page 6 unstable and may lead to loss of control. Do not force tool. Use the correct tool will do the job better and more safely at the rate for which is designed. Do not use tool if the cannot be controlled Disconnect the plug from the power adjustments,...
  • Page 7 Do not reach underneath • Always clamp workpiece or legs. Small or thin material loss of control. Never touch the drill bit after use. It may be hot after prolonged ® Always hold tool by insulated ® operation where the tool may contact with a "live"...
  • Page 8: Unpacking

    WARNING: If any part is broken or missing, do not attempt drill, plug in the power cord, or operate the drill until the broken or missing part has been replaced. Failure to do so could result in possible...
  • Page 9: Variable=Speedtrigger Switch

    Before use of this product, To stop the drill, release the trigger delivers higher speed with increased trigger pressure. SWITCH position, push the switch to the left. To use the drill push the switch to the right. Lock-on button Cord guard 5.2A...
  • Page 10 BUILT-IN BELT CLiP Conveniently hooks onto your tool belt for carrying the drill. NOTE: Make sure the plug has been removed from power supply and drill bits have been removed from drill. Your drill comes equipped which can be adjusted •...
  • Page 11 Insert the drill bit into the chuck jaws as far as it can go. Rotate the chuck clockwise drill bit is held firmly in place by the chuck jaws.
  • Page 12 1. Check the drill bit to make sure it is firmly locked in the chuck jaws of the drill. Check that the forward/reverse Hold the drill firmly with both hands whenever...
  • Page 13 Covering the air vents will reduce to motor overheating. 4. Holding the drill firmly, place the point of the drill bit at the point to be drilled. Squeeze the trigger to start the drill. 5. Move the drill bit into the workpiece, the bit cutting.
  • Page 14: Maintenance

    WARNING: Water must never come into the tool. 17217 Manual Revised 09-0708 at a Sears store or other Craftsman outlet before performing of your drill allows for long life and trouble free operation. and maintenance schedule maintenance gasoline or other cleaning agents. Never...
  • Page 15 SOLUTION Connect to power source. Confirm power source (outlet)is operable Replace drill bit if dull or worn; tighten chuck jaws to firmly secure drill bit Clean, clear vents. Do not cover with hand during operation Page 15...
  • Page 16 3/8" Keyless Drill MODEL NUMBER 320.17217 Always mention the Model Number when ordering parts for this tool 17217 Manual Revised 09-0708 Page 16...
  • Page 17 3860001000 5620179000 3550093000 5700015000 3520013000 3520016000 5700008000 3320036000 2240066000 3120245000 5610042000 2240073000 3320035000 2750119000 2740100000 5700004000 4960015000 2800015000 3700491000 2820717000 2820718000 2820720000 2820722000 2820724000 2820726000 4870024000 5610023000 3700285000 3121001000 4810002000 17217 Manual Revised 09-0708 Chuck Screw (L.H.) Spindle Ball Bearing Septa Gear Ball Bearing...
  • Page 18 17217 Manual Revised 09=0708 Page 18...
  • Page 19 17217 Manual Revised 09=0708 Page 19...
  • Page 20: Troubleshooting

    For expert troubleshooting For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it ! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself.

This manual is also suitable for:

Evolv 320.17217

Table of Contents