Description; Important Safety Instructions; Know Your Reversible Drill; Product Specification - Craftsman nextec 320.10003 Operator's Manual

• Save these instructions. Refer to them frequently and use them to instruct oth-
ers who may use this tool. If you lend this tool to someone else, also lend these
instructions to them to prevent misuse of the product and possible injury.
IMPORTANT SAFETY INSTRUCTIONS
Save these instructions. This manual contains important safety and operating
instructions for 12 V DRILL 10003.
Before using the battery charger, read all instructions and cautionary mark-
ings on the battery charger, the battery and the product using batter, as well
as the operator's manuals for these products.
CAUTION: To reduce the risk of injury, charge only lithium-ion rechargeable
batteries. Other types of batteries may burst, causing personal injury or damage.
_, WARNING: When using electric appliances, basic precautions should
always be followed, including the following.
a) To reduce the risk of injury, close supervision is necessary when an appli-
ance is used near children.
b)
c)
d)
Only use attachments recommended or sold by manufacturer.
Do not use outdoors.
For a portable appliance - To reduce the risk of electrical shock, do not put
the Drill and Battery Pack in water or other liquid. Do not place or store ap-
pliance where or can fall or be pulled into a tub or sink.
KNOW YOUR REVERSIBLE DRILL (Fig.l)
Fig. 1 Two-Speed Gearbox Switch
Torque-Adjustment Ring
Vents
Keyless Chuck
LED Light
Trigger Switch
Two-Speed
Gearbox
Direction-of-Rotation
Selector (FORWARD/
CENTER LOCK/REVERSE)
PRODUCT SEPCIFICATION
Chuck 3/8-in.
Motor 12 Volt DC
No-Load Speed LO 0-400/HI 0-1300 (RPM)
Clutch 18 Position
Torque 195 in.lbs
Drill Weight (with battery) 2.42 Ibs
Battery Type Lithium-Ion
Battery Voltage 12.0 Volt DC
Charger Input 120-Volts, 60 Hz AC only
Optimum Charging Temperature 32°F (0 ° C) -104°F (40°C)
10003 ManuaLRevised_08 0724 Page 12 10003 ManuaLRevised_08 0724 Page 13