Advertisement
OPTIONAL
EDGE GUIDE
See Figure 14.
An optional
edge guide, part number 975225-001,
is
available for use with your saw. It can be used for
making crosscuts and rip cuts.
TO INSTALL:
•
Unplug your saw.
_lL
WARNING:
Failure to unplug your saw could
result in accidental starting causing possible
serious injury.
•
Insert arm through the two slots in the base of your
saw as shown in Figure 14.
•
Adjust edge guide to the desired width and lock in
place with the edge guide screw.
EDGEGUIDE
BASE
Fig, 14
14
Advertisement
