Craftsman 320.17559 Product Manual page 8

Your Belt Sander has been shipped fully assembled, except for the sanding belts
and dust-collecting box, which are included in the carton. Inspect the tool care-
fully to make sure that no breakage or damage has occurred during shipping, if
any parts are damaged or missing, return the Belt Sander to any Sears store or
other Craftsman outlet in the United States to have it replaced.
Please see the Operations section of the product manual for instructions for
installing the sanding belt and dust-collecting box.
WARNING! If any parts are missing, DO NOT operate this tool until the
missing parts are replaced.
_1_ WARNING! Your Belt Sander should NEVER be connected to the power
source when you are assembling parts, making adjustments, installing or
removing belt, cleaning, or when it is not in use.
Before attempting to use any tool, always learn about all of the operating features
and safety instructions.
Fig. 1
Front handle
Dust-exhaust port
Belt-tracking knob
ON/OFF Trigger switch
Lock-on button
/
_ Rear handle
ord
\ Live-wire indicator
Dust-collecting box
:Lock lever
17559 ManuaLRevised_07-0131 Page 8