Craftsman 320.17559 Product Manual page 13

_k WARNING! DO NOT at any time allow brake fluids, gasoline, petroleum-
based products, penetrating oils, etc. to come in contact with plastic parts.
They contain chemicals that can damage, weaken, or destroy plastic.
o Before cleaning or performing any maintenance, make sure that the belt sander
has been disconnected from the power supply.
o Keep all ventilation openings clean.
o When servicing a too!, use only identical replacement parts. Follow instructions
in the maintenance section of this manual. Use of unauthorized parts or failure
to follow maintenance instructions may create a risk of electrical shock and/or
serious personnel injury.
o All service that requires opening the belt sander MUST be performed only by a
Sears Service Center. All motor parts constitute important parts of the double-
insulation system and MUST only be serviced by a Sears Service Center. Ser-
vice performed by unqualified personnel could result in a risk of inju_.
e Avoid using solvents when cleaning plastic parts. Most plastics can be
damaged by commercial solvents. Use clean cloths to remove dirt, carbon
dust, etc.
17559 Manual_Revised 0743131 Page 13