Table of Contents
Advertisement
duce hazard ofkickback; however,
such features will n ot t otally eliminate
this danger. Donot r ely only o nsafety
devices.
• Handguard:
designed
toreduce the
chance ofyour l eft h and c ontacting
the chain i fyour h and s lips o ffthe
front handlebar.
• Position offront and rear h andlebars:
designed
with distance between
handles and "in-line" with each o ther.
The spread and "in-line" position of
the hands provided by this design
work t ogether togive balance and
resistance
incontrolling
the pivot of
the saw back t oward the operator if
kickback occurs.
• Reduced-Kickback
Guide Bar: de-
signed with asmall radius tipwhich
reduces the size ofthe kickback
danger zone. This type barhas been
demonstrated
tosignificantly
reduce
the number and seriousness
ofkick-
backs when t ested i naccordance
with ANSI B175.1.
._._
Small Radius
Tip Guide Bar
Large Radius
'_'
Tip Guide Bar
• Low Kickback
Chain has met kick-
back performance
requirements
when tested on the representative
sample of these chain saws speci-
fied in ANSI B175.1.
Low Kickback Chain
........ Contoured Depth Gauge
Elongated Guard Link
Deflects Kickback Force
And Allows Wood To
Gradually Ride Into Cutter
SAFETY
NOTICE:
Exposure to
vibrations t hrough prolonged use of
hand toolscould cause blood vessel
ornerve damage
inthe fingers, h ands,
and joints o f people prone to
circulation
disorders
or abnormal
swelling. Prolonged
use in cold
weather has been linked to blood
vessel damage
in otherwise
healthy
people. If symptoms
occur such as
numbness,
pain, loss of strength,
change in skin color or texture, or loss
of feeling
in the fingers, hands, or
joints, discontinue
the use of this tool
and seek medical attention. An
anti-vibration
system does not
guarantee
the avoidance
of these
problems.
Users who operate power
tools on a continual
and regular basis
must closely monitor their physical
condition and the condition of this tool.
DOUBLE
INSULATION
CONSTRUCTION
This unit is Double Insulated to help pro-
tect against electric shock. Double in-
sulation construction consists of two
separate 'layers" of electrical insulation
instead of grounding.
Tools built with this insulation system are
not intended to be grounded.
No
grounding means is provided on this
unit, nor should a means of grounding
be added to this unit.
Safety precautions must be observed
when operating any electrical tool. The
double insulation system only provides
added protection against injury resulting
from an internal electrical insulation
failure.
STANDARDS:
This product is listed by
Underwriters
Laboratories,
Inc. in ac-
cordance
with UL Standard
1662 and
CSA Standards
Z62.1 and Z62.3 and
ANSI B175.1.
SAVE
THESE
INSTRUCTIONS
CARTON
CONTENTS
Model 358,341060
Chain Saw (fully assembled)
Bar Sheath
Examine parts for damage. Do not use
damaged parts.
NOTE: If you need assistance
or find
that parts are missing or damaged,
please call 1-800-235-5878
ASSEMBLY
Your unit is fully assembled; no assem-
bly is required.
Hide quick links:
Advertisement
Table of Contents
