Assembly; Carton Contents - Craftsman 358.797750 Operator's Manual

• Wipe upall f uel s pills b efore starting
ud_o
• Move a tleast 1 0feet(3meters) away
from fueling s ite before
s tartingunit.
• Stop engine and allow unit to cool
before removing the fuel cap.
, Do not store the unit with fuel in the
fuel tank; use up fuel left in the car-
buretor and fuel lines by starting the
unit and letting it run until it stops.
• Store unit and fuel in an area where
fuel vapors cannot reach sparks or
open flames from water heaters, ele¢.
tric motors or switches, furnaces, etc.
TRANSPORTING & STORAGE
• Stop unit before Heaving work area,
• Allow unit to cool, run fuel out of the
fuel tank, and secure the unit before
storing or transporting it in a vehicle.
• Before storing, use up fuel left in the
carburetor by starting the unit and
letting it run until it stops. Always al-
low the unit to cool before storage.
• Store unit and fuel in an area where
fuel vapors cannot reach sparks or
open flames from water heaters, elec-
tric motors or switches, furnaces, etc.
• Store unit so the blade cannot acci-
dentally cause injury.
• Store unit out of reach of children.
If situations occur which are not cov-
ered in this manual, use care and
good judgment. If you need assis-
tance, contact your nearest Sears Ser-
vice Center or call the 1-800 number
listed on the back page of this manual.
SAFETY NOTICE: Exposure to vibra-
tions through prolonged use of gasoline
powered hand units cou}d cause b_ood
vessel or nerve damage in the fingers,
hands, and joints of people prone to cir-
culation disorders or abnormal swell-
ings. Prolonged use in cordweather has
been linked to blood vessel damage in
otherwise healthy people, If symptoms
occur such as numbness, pain, loss of
strength, change in skin color or texture,
or loss of feeling in the fingers, hands, or
joints, discontinue the use of this unit
and seek medical attention. An anti-vi-
bration system does not guarantee the
avoidance of these problems. Users
who operate power tools on a continual
and regular basis must monitor closely
their physical condition and the condi-
tion of this unit.
SAVETHESErNSTRUCTIONS
CARTON CONTENTS
Model 358.797750
Edger
Screws
Locknuts
Tube
Cabie Ctamp
Hex Wrench
Container of Oit
Examine parts for damage. Do not use
damaged parts.
NOTE: If you need assistance or find
parts missing or damaged, call the
1-800 number found on the front page
of this manual.
ASSEMBLY
WARNING: If received assembled,
repeat all steps to ensure your unitis
properlyassembledand all fasteners
are secure.
This Operator's Manualhas been de-
velopedto help you assemble the unit
and to provideitssafe operation.It is
important t hat you read theentireman-
ual to become familiar with theunitbe-
foreyou begin assembly.
Read your Operator's Manual.
Tools you will need:
• Screwdriver
• Adjustable Wrench
• Hex Wrench(provided)