Olympus SZ-31MR Instruction Manual page 41

Viewing the image immediately after Viewing the image immediately after
shooting [Rec View] shooting [Rec View]
z (Camera Menu 2)
Submenu 2
The image being recorded is not
displayed. This allows the user
Off to prepare for the next shot while
following the subject in the monitor
after shooting.
The image being recorded is displayed.
On This allows the user to make a brief
check of the image that was just taken.
Automatically rotating images shot with Automatically rotating images shot with
the camera in a vertical position during the camera in a vertical position during
playback [Pic Orientation] playback [Pic Orientation]
z (Camera Menu 2)
During shooting, the [y] (p. 45) setting on the
playback menu is set automatically.
This function may not work properly if the camera is
facing up or down during shooting.
Submenu 2
Information about the vertical/
horizontal orientation of the camera
during shooting is not recorded with
Off
images. Images shot with the camera
in a vertical position are not rotated
during playback.
Information about the vertical/
horizontal orientation of the camera
On during shooting is recorded with
images. Images are automatically
rotated during playback.
For information on using the menus, see "Setup menu" (p. 8).
Rec View
Application
Pic Orientation
Application
Displaying icon guides [Icon Guide] Displaying icon guides [Icon Guide]
z (Camera Menu 2)
Submenu 2
Off No icon guide is displayed.
The explanation of the selected icon
will be displayed when a shooting
mode or function menu icon is
On
selected (position the cursor on
the icon for a while to display the
explanation).
Icon guide
Imprinting the date of recording Imprinting the date of recording
[Date Stamp] [Date Stamp]
z (Camera Menu 2)
Submenu 2
Off Do not imprint the date.
Stamp new photographs with the
On
date of recording.
When the date and time are not set, [Date Stamp]
cannot be set.
"Language, date, time, and time zone" (p. 15)
The date stamp can not be deleted.
[Date Stamp] is not available in [Panorama] or [3D
Photo] mode.
Date stamps are not added in sequential shooting.
Icon Guide
Application
ISO Auto
0.0 0.0
WB WB
AUTO AUTO
ISO ISO
ISO ISO ISO ISO
3200 3200 AUTO AUTO 100 100
The camera will automatically
16
set the ISO sensitivity for
optimal image quality.
MENU MENU
Date Stamp
Application
EN
ISO ISO
200 200
M
41