Olympus SZ-31MR Instruction Manual page 19

Using the fl ash
The fl ash functions can be selected to best match the
shooting conditions.
1
Slide the fl ash switch to raise the fl ash.
To turn off the fl ash To turn off the fl ash
Press the fl ash down back into the camera.
2
Select the fl ash option in the function menu.
3
Use HI to select the setting option, and
press the A button to set.
Option
The fl ash fi res automatically in low-light
Flash Auto
or backlight conditions.
Pre-fl ashes are emitted to reduce the
Redeye
occurrence of red eye in your photos.
The fl ash fi res regardless of the
Fill In
available light.
Flash Off The fl ash does not fi re.
Flash Auto
0.0 0.0
WB WB
AUTO AUTO
ISO ISO
AUTO AUTO
16
M
MENU MENU
Description
Changing the shooting information
display
The display of the screen information can be changed to
best match the situation, for example, the need for a clear
view of the screen or for making a precise composition by
using the grid display.
1
Press F (INFO).
●
The displayed shooting information changes in
the order shown below each time the button is
pressed. "Shooting mode display" (p. 4)
Normal
P P
0.0 0.0
WB WB
AUTO AUTO
ISO ISO
AUTO AUTO
16
M
4 4
N 00:34 00:34
ORM 720
Movie information
P P
0.0 0.0
WB WB
AUTO AUTO
ISO ISO
AUTO AUTO
16
M
4 4
00:34 00:34
N
720
ORM
Reading a histogram Reading a histogram
If the peak fi lls too much of the frame, the
image will appear mostly white.
If the peak fi lls too much
of the frame, the image
will appear mostly black.
The green section shows luminance distribution within
the screen's center.
No information
P P
Detailed
P P
0.0 0.0
WB WB
AUTO AUTO
ISO ISO
AUTO AUTO
16
M
4 4
00:34 00:34
N
720
ORM
19
EN