Advertisement
OPERATION
(Cont'd)
SWITCH
An important
new feature of your sander is the
sw_tch desigrn. It has multi-finger
control for use
when operating at different angles or sandJng posi-
tions and to help reduce fatigue.
tt also has a lock-on feature in the switch for added
utility
and
convenience
on extended
work
re*
ulrement$.
_refully
read and understand the following instruc-
tions for correct operation of the switch before con-
necting your sander to power supply.
TO ACTIVATE SWITCH
To start your sander, depress the switch trigger and
switch actuator at the same fime_ See Figure 4.
DEPRESS
SWITCH
TRIGGER
AND SWITCH
AC.
UATOR TO START YOUR SANDER
Fig. 4
NOTE: PARTS OF THE SWITCH
CAN BE EASILy
IDENTIFIED BY THEIR COLOR. THE SWITCH TRIG-
GER IS RED. THE 8WrTCH ACTUATOR IS BLACK.
"LOCK-ON"
SWITCH
1. Start your sander by depressing the switch tdgger
and switch a(;tuator.
2. Continue to hold your sander _nthe "on" position
with your fingertips and release the switch trigger.
See Figures 5 and 6,
3. Release
the switch
actumtor
and
grasp your
sander by the handle as shown in figure 7.
TO RELEASE '%OCK-ON"
FEATURE
1. Depress the switch trigger and release it. See
Figure a.
TO ACTIVATE THE "LOCK-ON"
FEATURE:
Fig. 5
STEP 1. DEPRESS SWITCH TRIGGER AND SWITCH
ACTUATOR WITH YOUR FINGERTIPS
Fig.
STEP
2.
RELEASE
SWITCH
TRIGGER
TO
"LOCK-ON"
Fig. 7
TEP 3. GRASP BY HANDLE FOR SANDING
WITH
YOUR SANDER IN "LOCK-ON"
POSITION
Fig. 8
STEP 4. DEPRESS SWITCH TRIGGER TO RELEASE
"LOCK-ON"
FEATURE
Page 6
Advertisement
