Advertisement
FULL ONl_ YEAR WARRANTY ON CRAFTSMAN SANDER
If this Craftsman Sander fails to ;ale comnptette satisfaction within one year from the date of purchase, RETURN IT
TO THE NEAREST SEARS STORE iN THE UNITED STATES, and Sears wiil repair it, free of charge.
If this Craftsman Sander is used for commercial or rental purposes, this warranty applies for only 90 days from the
date of purchase,
This warranty gives you specific tegal dghts, and you may also have other dghts which val_ from state to state.
Sears, Roebuck snd Co,, DEPT. 817 WA, Hoffman Estates, IL 60179
INTRODUCTION
DOUBLE _$ULATION
is a concept in safety, in electric
power tools, whk_,h eliminates the need for the usual three
wire grounded power cord and grounded supply system.
Wherever there is aiect rlc current in the tool there are two
complete sets of insulatton to protect the user. All exposed
metal parts ere isolated from internal metal motor compo-
nents _i_ protecting inlu_Oon,
IMPORTANT - Servicing of a tool with double aisulatk_
requires extreme care and knowledge of the system and
should be performed only by a qualified service technician,
For service we suggest you return the too_to your nearest
Sears Store for repair. Always use original factory replace-
ment parts when servicing,
RULES FOR SAFE OPERATION
READ ALL INSTRUCTIONS
1. KNOW YOUR POWER TOOL - Reed owner's
manual carefully. Learn its applications and
limitations as well as the specific potential
hazards related to this tool.
2. GUARD AGAINST
ELECTRICAL
SHOCK
BY PREVENTING
BODY CONTACT WITH
GROUNDED
SURFACES.
For example:
Pipes, radiators, ranges, refrigerator enclo-
sures.
3. KEEP GUARDS IN pLACE
end in working
order.
4. KEEP WORK AREA CLEAN, Cluttersd aroas
and benches invite accidents.
5, AVOID DANGEROUS ENVIRONMENT. Don't
use power tool in damp or wet locations or
expose to rain. Keep work area well lit.
6. KEEP CHILDREN
AND VISITORS AWAY.
All visitors should wear safety glasses and be
kept a safe distance from work area. Do not
let visitors Contact tool or extension cord.
7. STORE IDLE TOOLS. When not in use tools
should be stored in a dry, high or lacked-up
place - out of the reach of children.
Page2
8. DON'T FORCE TOOL. It will do the job better
and safer at the rate for which it was de-
signed.
9. USE RIGHT TOOL. Don't force small tool or
attachment to do the job of a heavy duty tool.
Don't use tool for purpose not intended - for
example - Don't use a circular saw for cutting
tree limbs or logs.
10. WEAR PROPER APPAREL. No loose cloth-
ing or jewelry to get caught in moving parts.
Rubber gloves and non-skid footwear are rec-
ommended when working outdoors. Also,
wear protective hair covering to contain long
hair and keep it from being drawn into air
vents.
11. ALWAYS WEAR SAFETY GLASSES.
Ev-
eryday eyeglasses have only impact-resis-
tant lenses; they are NOT safety glasses.
12. PROTECT YOUR LUNGS. Wear a face or
dust mask if cutting operation is dusty.
13. PROTECT YOUR HEARING. Wear hearing
protection during extended periods of opera-
tion.
Advertisement
