GE PFSF6PKXABB Owner's Manual And Installation Instructions page 12

About the control with temperature settings for non-LeD models.
f
TURBO FREEZE TURBO COOL
Hold 3 sec Hold 3 sec
for Turbo Freeze or Turbo Coo
(Hold 3 sec (Hold 3 sec
to Reset Filter} to Lock Control)
NOTE:Therefrigerator is shipped with protective film covering the temperature controls. If this film was
not removed during installation, remove it now.
The temperature controls are preset in the factory at 38°Ffor the refrigerator compartment and -2°F for
the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings.
The temperature controls can display both the SETtemperature as we!! as the actual temperature in the
refrigerator and freezer.Theactual temperature mag varg slightlg from the SETtemperature based on usage
and operating environment.
ADJUST
REFRIGERATOR
{Hold 3 sec
for Turbo Cool)
FREEzERADJUS T
{Hold 3 sec
for Turbo Freeze)
Changing the Temperature
Tochange the temperature, press and
releasethe ADJUSTFREEZER or ADJUST
REFRIGERATOR pad. The display will
show the actual temperature. To change
the temperature, tap either the ADJUST
FREEZER or ADJUSTREFRIGERATOR pad
until the desired temperature is displayed.
Once the desiredtemperature has been
set, the temperature display will return
to the actual refrigerator and freezer
temperatures after 10 seconds. Several
adjustments may be required.
Eachtime you adjust controls, allow
24 hours for the refrigerator to reach
the temperature you have set.
12