GE PFSF6PKXABB Owner's Manual And Installation Instructions page 11

SYSTEM
12:00 PM I
METRIC
Button
ge.com
ICEMAKER
Button
WATER FILTER: GOOD
SETTINGS (cont.)
UNITS
To change the temperature readings from Englishunits to Hetric units,
press the NETRICbutton. Units shown on the HONEscreen will now read
in Celsiusinstead of Fahrenheit.
0 SCREEN
Button
ICEMAKER
The icemaker will produce seven cubes per cycle-approximately
100-130 cubes in a 24-hour period,depending on freezer compartment
temperature, room temperature, number of door openings and other
use conditions. If the refrigerator is operated before the water connection
is made to the icemaker, press and releasethe ICENAKERbutton on
the SYSTEM screen to disengage the icemaker.When the refrigerator
has been connected to the water supply, press and releasethe ICENAKER
I button on the SYSTEM screen to engage the icemaker.A newly installed
refrigerator may take 12 to 2/4hours to begin making ice cubes and
the ICENAKERdefault is ON (check).
You will hear a buzzing sound each time the icemaker fills with water.
Throw away the first few batches of ice to allow the water line to clear.
It is normal for several cubes to be joined together. If ice is not used
frequently, old ice cubes will become cloudy, taste stale and shrink.
NOTE:In homes with lower-than-average water pressure,you may
hear the icemaker cycle multiple times when making one batch of ice.
NOTE:Turn OFFthe icemaker if the water supply is shut off.
'SETTINGS
SCREEN
Select the SCREENbutton from the SETTINGS screen to adjust
the BRIGHTNESS of the display and to choose a SCREEN SAVER.
For BRIGHTNESS, use the LEFTand RIGHTarrow keys to dim and
brighten the screen.
For SCREEN SAVER, u se the UP and DOWN arrow keys to choose
DEFAULT, SLIDESHOW,BACKGROUNDor OFF.
DEFAULT gives a slide show of factory pre-loaded pictures at lO-second
intervals. These pictures are not viewable in the PHOTOS screen and
remain even when all photos are deleted.
SLIDESHOW takes the most recently selected photo among
user-uploaded pictures and displays this one first, then the remaining
random photos at lO-second intervals for 15 minutes.
BACKGROUND takes the most recently selected photo among
user-uploaded pictures and displays this as a static image.
After 15 minutes of displaying this screen with no activity,
the backlight will go OFR
OFFsets no BACKGROUND, SCREENSAVERor SLIDESHOW.
SetScreenSaverand/or 0 SetBrightness
Background of Screen
11