GE EGR2000 Owner's Manual & Installation Instructions page 16

Using the clock and timer.(o,sonde n od s)
Not all features are on all models.
To Reset the Timer
If file display is sdll showing die dine
remaining, you may change it by touching
die KitchenTimerOn/Off pad, alien touch
die + or - pads until die time you want
appems in the displ W.
If the remaining dine is not in die display
(clock, start time or cooking time are in
die display), recall die remaining time by
touching
die Kitchen Timer On/Off pad and
then touching die + or - pads to enter die
new time you want.
To Cancel the Timer
Touch the KitchenTimerOn/Off pad t_,vice.
o
On/ Off
or
®
ime)
End of Cycle Tones(onsomemodels)
Clear die tones by pressing die pad of die
fimcdon you are using.
Power Outage
If a flashing timeis in thedisplay, youhave
experienced a powerfailure. R esetthedock.
To reset the clock, much die Clockpad.
Enmr die correct time of day by touching
die + or - pads. Touch die Start/On pad.
16