Table of Contents
Advertisement
CARTON
CONTENTS
1 - Generator
1 - Owner's
Manual
2 - Wheels
1 - Foot Bracket
2 - Bracket
1 - Isolator
Foot
2 - Shoulder
Bolts
6 - 5/16-18
x 3.4 "
Cap Screws
9 - 5/16-18
Lock Nuts
1 - Handle
2 - Handle
Caps
/))///)/)//)/))
2 - 5.16-18
x 1 3/4 "
Cap Screws
2 - Washers
2 - 3/8-16
Lock Nuts
Read owner's manual.
Do not attempt to operate equipment until you have read Owner's
Manual for Safety, Assembly, Operation, Maintenance, Storage Instructions.
TOOLS
NEEDED
FOR ASSEMBLY
1- Box Cutter or Knife
2 - 9/16 " Wrenches
2 - 1/2" Wrenches
1 - 1" thick x 1' square piece of wood
REMOVE
GENERATOR
FROM
CARTON
•
Open carton from top.
•
Cut carton along dotted lines.
•
Remove all carton inserts.
•
Remove generator through opening in carton.
•
Using a 9/16 inch socket remove shipping block
from under the generator head.
Unscrew the bolt
and remove the wood block. NOTE: It is very
important that this is removed before starting your
generator.
IMPORTANT:
Before any attempt to start your genera-
tor be sure to check engine oil (See Adding Engine Oil
paragraph in the Operation section on page 13 of this
manual.)
I
9 -- ENG
MCP-679_O_
Advertisement
Table of Contents
