FujiFilm FINEPIX A500 Owner's Manual page 90

90
I Connecting to a PC
By connecting the camera to a PC, your system can be expanded to fill a wide range of uses. Using
"FinePixViewer" performs images saving, browsing and file management etc.
If the power cuts out during data transmission, the data will
not be transmitted correctly, Always use the AC power
adapter when connecting the camera to a PC,
Refer to Software
Installation ( ,p.84, 87)
the first time you connect
the camera to your PC,
Install the software first, Do
not connect the camera to
the PC before installing all
the software.
CD-ROM
(Software for FinePix BZ)
(1_Insert the xD-Picture Card with images into the
camera (*p.18).
{2_Press [] for about 1 second to
turn the camera on in Playback
mode.
{3_Press MENU/OK to display the
SET-UP menu.
Refer to "Using the SET-UP
menu" (*p.70).
{4_Select i_]_, DSC in _ USB
MODE in the SET-UP menu
(*p.72).
{5_ Press POWER to turn the
camera off.
{6_Turn your PC on.
(_ Connect the camera to your PC using the USB cable
(mini-B),
USB
socket
(mini-B)
{_ Press [] for about 1 second to
turn the camera on in Playback
mode.