Operating Steps - Frigidaire GCET1031FS4 Owner's Manual

LAUNDRY CENTER WASHER OPERATING INSTRUCTIONS
WASH/RINSE TEMPERATURE
COLD
COLD
o
HOT
COLD
WARM
COLD
LOAD SiZE
MEDIUM
SMALL • LARGE
SOAK/
PREWASH 15 12
8
PREWASH • 4
SOAK
SPIN
RINSE
KNITS/
DELICATES 6
RINSE
FINAL SPIN
WHITES
FINAL SPIN
COLORS
Before Operating Your Washer
Read your Washer Owner's Guide. It has important safety
and warranty information. It also has many suggestions for
best washing results.
To reduce the risk of fire, electric shock, or
injury to persons, read the IMPORTANTSAFETY INSTRUCTIONS
inyour Washer Owner's Guide before operating this appliance.
Operating Steps
Read Washing Procedures in your Owner's Guide. It
explains these operating steps in detail.
1. Sort laundry into loads that can be washed together.
2. Prepare items for washing.
3. Pretreat stains and heavy soil
4. Add the measured amount of detergent to wash tub
before adding the laundry load.
5. ff desired, add fiquid b/each rob/each dispenser. DO
NOTpour bleach directly onto the load.
6. If desired, add #quid fabric softenerto fabric softener
dispenser. DO NO Tpourfabric softener directly onto
wash load.
7. Add laundry load loosely to wash tub. Dry load should
not be higher than top of agitator vanes. For best
results, DO NOT ovedoad.
8. Select the wash cycle andsettings according to type,
size and soil level of each load.
9.
Close rid and pu# out Cycle Selector knob to start
washer. The washer will not fill with water, agitate or
spin when the lid is open, and will only start to do so if
the lid is closed.
To stop the washer, push in the Cycle Selector knob. To
change a cycle, push in the Cycle Selector knob and turn
it clockwise to the desired setting. Pull out the knob to
restart the washer.
10. Remove items at end of cycle. Wait about 2-3 minutes
for safety lid lock to release.
Cycle Selection
Push in and turn the Cycle Selector knob clockwise to the
desired cycle. For best results, follow the washing
instructions on the fabric care labels.
The Whites, Colors and Knits/Delicates cycles progress
through wash agitation, drain and spin with a spray rinse,
rinse agitation, and a final spin.
Whites Cycle
This cycle provides up to 15 minutes of normal agitation and
a fast spin for most fabrics.
Colors Cycle
This cycle provides up to 12 minutes of normal agitation and
a fast spin for cottons and blends with a no-iron finish. A
cool down spray rinse helps reduce wrinkling.
Printed in U.S.A. P/N 137230300 (0905)