Frigidaire GLEQ442CEs0 Operating Instructions

MOISTURE SENSOR MOISTURE SENSOR MOISTURE SENSOR
MOISTURE SENSOR MOISTURE SENSOR
INTERIOR DRUM LIGHT INTERIOR DRUM LIGHT INTERIOR DRUM LIGHT INTERIOR DRUM LIGHT INTERIOR DRUM LIGHT

Before Operating Your Dryer

Read your dryer Owner's Guide. It has important
safety and warranty information. It also has many
suggestions for best drying results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer owner's guide
before operating this appliance.

Operating Steps

Re Re ad Drying Procedures in your Owner's Guide. ad Drying Procedures in your Owner's Guide.
Read Drying Procedures in your Owner's Guide. Re Re ad Drying Procedures in your Owner's Guide. ad Drying Procedures in your Owner's Guide.
It explains these operating steps in detail.
1. Pr 1. Pr epare items for drying. epare items for drying.
1. Pr 1. Pr 1. Prepare items for drying. epare items for drying. epare items for drying.
2. Check that lint screen is clean and in place. 2. Check that lint screen is clean and in place. 2. Check that lint screen is clean and in place. 2. Check that lint screen is clean and in place. 2. Check that lint screen is clean and in place.
3. Load the dryer. 3. Load the dryer. 3. Load the dryer. 3. Load the dryer. 3. Load the dryer. If desired, add a dryer fabric
softener sheet.
4. 4. 4. 4. 4. Close the dryer door. Close the dryer door. Close the dryer door.
Close the dryer door. Close the dryer door.
5. 5. 5. 5. 5.Set Dry Temperature control. Select PRESS Set Dry Temperature control. Select PRESS Set Dry Temperature control. Select PRESS Set Dry Temperature control. Select PRESS
Set Dry Temperature control. Select PRESS
SAVER if desired. SAVER if desired. SAVER if desired. SAVER if desired. SAVER if desired.
6. 6. 6. 6. 6. Turn cycle selector clockwise to desired setting. Turn cycle selector clockwise to desired setting. Turn cycle selector clockwise to desired setting. Turn cycle selector clockwise to desired setting. Turn cycle selector clockwise to desired setting.
Printed in U.S.A.
OPERA OPERA TING INSTRUCTIONS TING INSTRUCTIONS
OPERA OPERA OPERATING INSTRUCTIONS TING INSTRUCTIONS TING INSTRUCTIONS
7. Start dryer. Push the Start button and hold for 1-
2 seconds, or turn the Turn to Start control
clockwise to ON. Hold for 1-2 seconds and release.
8. A signal will sound toward the end of the
cool down period when the Cycle Signal is
turned on.
9. Remove items immediately and hang or fold.
10. Clean lint screen after every load.
Temperature Selection
Always follow directions on fabric care
labels.
To avoid fire hazard, do not use heat
to dry items containing feathers or down, foam rubber,
plastics, or similarly textured, rubber-like materials.
Use Air Fluff-No Heat setting only.
The REGULAR-HIGH HEAT, PERM PRESS-MEDIUM
HEAT, and KNITS/DELICATES-LOW HEAT
temperature settings may be used with any cycle
setting. The AIR FLUFF-NO HEAT setting can be used
only in the Timed Dry cycle.
AIR FLUFF-NO HEAT setting tumbles the load without
heat. Use Air Fluff to freshen clothing, pillows or
blankets, or to dust draperies.
Cycle Selection
Turn cycle selector clockwise to desired cycle and
setting.
Each cycle ends with a cool down period. The heat
automatically turns off and the load continues to tumble
during the cool down period. This reduces wrinkling and
makes items easier to handle during unloading.
Drying time varies depending on size and dampness of
load, weight and fabric type. Room temperature and
humidity, type of installation and electrical voltage or
gas pressure can also affect drying time.
P/N 134492800A (0501)