Advertisement
KNOWYOUR SANDER
See Figure 1.
Before attempting to use your sender, familiarize yourself
with all operatingfeatures and safety requirements.
Your sender is suitable for sending with coarse, medium,
and fine gilt sandpaper. It will produce a fine scratchfree
finish when used to send with the grain on wood surfaces.
It has also been designedso that sanding flush to comers
is possible.
APPLICATIONS
(Use only for the purposes listed below)
•
Sanding on wood surfaces.
•
Removing rust from and sandingsteel surfaces.
SW_CH
This tool is equipped with a slide switch located on the
rear handle of your sander. To tum sander ON, slide the
switch forward as shown in Figure 1. Stide the sw_tch
back to turn your sander OFF. Be sure sander switch is in
OFF positionbefore connectingto power supplysource.
DUSTLESS
FEATURE (Model No. 315.116320)
A dust bag assemblyand a vacuumhose adapteris
Included with yoursender. Each providea dust collection
systemfor yoursander.
TOTURN
SANDER ON
ELECTRICAL
CONNECTION
Your sander has a precisionbuiltelectric motor.It should
be connected to a power supply that Is 120 volts, 80 Hz,
AC only (normal household current). Do not operate
this tool on directcurrent (DC). A substantialvoltage drop
will cause a foss of power and the motorwilt overheat, if
your tool does not operate when plugged intoan outlet,
double-checkthe power supply.
PRODUCT SPECIFICATIONS
No Load Speed
Rating
Input
Model No. 116310
Model No. 116320
Orbit Diamter
Size of Paper
Paper Type
Dustless
Vacuum Hose Adaptor
12,000 opm
120 Volts,60 Hz, AC only
1.8 Amperes
2.0 Amperes
1/16 in.
113sheet
Non-AdhasiveSandpaper
Adhesive Sandpaper
Model No. 116320
Model No. 116320
_IL WARNING:
Do not allow familiaritywith your
sender to make you careless. Remember that a
careless fraction of a second is sufficientto inflict
severe injury.
SWITCH
SWITCH
REAR
HANDLE
TOTURN
SANDER OFF
HANDLE
VACUUM HOSEADAPTER
(MODEL NO,315.116320)
DUSTBAGASSEMBLY
(MODEL NO.315,116320)
CUSHION
PAPER CLAMP
LEVER
Fig. 1
6
Advertisement
