Advertisement
Quick Links
Owner's Manual
II::RRFTSMRN'I
1/3 SHEET SANDER
Double Insulated
Model Nos.
315.116310
315.116320
ModelNo.315.116310
Save this manual for
future reference
Model No. 315.116320
CAUTION:
Read and
follow all Safety Rules and
Operating Instructions before
first use of this product.
Customer Help Line: 1-800-932-3188
Sears Roebuck and Co., Hoffman Estates,
IL 60179 USA
Visit the Craftsman web page: www.sears.com/craftsman
972000-506
12-98
•
Safety
• Features
• Assembly
• Operation
• Maintenance
• Parts List
(_o
NRTL
Advertisement
Related Manuals for Craftsman 315.116310
Summary of Contents for Craftsman 315.116310
- Page 1 • Features Operating Instructions before • Assembly first use of this product. • Operation • Maintenance Customer Help Line: 1-800-932-3188 Sears Roebuck and Co., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: www.sears.com/craftsman • Parts List NRTL 972000-506 12-98...
- Page 2 TABLE O_ CONTENTS Is' General Safety Rules ..............................• SpecificSafety Rules/Symbols ..........................3-4 • Features ..................................• Assembly..................................• "Operation..............................;..... 9:;10 • Maintenance................................• Accessories ................................. • ExplodedView And Repair Parts List ........................14-15 • Parts Ordering / Service .............................. WARNING: Read end understand all Instruc- •...
- Page 3 • Remove adjusting keys or wrenches before • Store Idle tools out of reach of children end turning the tool on. A wrench or a key that is left other untrained persons. Tools are dangerous in the hands of untrained users. attached to a rotating part of the tool may result in personal injury.
- Page 4 SpecificSafetyRulesfor Sanders parts, mounting, and any other conditions that may affect Its operation. A guard or other part _ • Never use this or any power sander for wet that Is damaged should be progerly repaired or sanding or liquid polishing.
- Page 5 SYMBOLS •. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Amperes Current Hertz Frequency(cycles per second) Watt Power Minutes Time AlternatingCurrent Type or a characteristicof current No Load Speed Rotational speed, at no load Class II Construction Designates Double Insulated Constructiontools .../min Revolutionsor ReciprocationPer Minute Revolutions,strokes, surface speed, orbits etc.
-
Page 6: Knowyour Sander
KNOWYOUR SANDER ELECTRICAL CONNECTION See Figure 1. Your sander has a precisionbuiltelectric motor.It should Before attempting to use your sender, familiarize yourself be connected to a power supply that Is 120 volts, 80 Hz, with all operatingfeatures and safety requirements. AC only (normal household current). - Page 7 WARNING: Your sander should never be con- • Lift up on lever on the left side of sander and lock into. nected to power supply when you are assembling slot on platen. Apply downwardpressureto conform parts, making adjustments,assemblingor replacing sandpaper to platen. sandpaper, cleaning, or when not in use.
- Page 8 ATTACHING DUSTBAGASSEMBLY TO REMOVE AND EMPTY DUST BAG (Model No.315.116320) See Figure 5. See Figure 4. • Unplugyoursander. DUSTSAG WARNING: Failure to unplugyour sander could resultin accidental starting causing possiblesedous personalinjury. • Remove dust bag assembly from sander. To remove, grasp adapter and pull straight out.
- Page 9 ATTACHING VACUUM HOSEADAPTER WARNING: Always wear safety gogglesor safety (Model No,315.116320) glasses with side shields when operating your sander. Failure to do so could result in foreign See Figure6. objectsbeing thrown into youreyes, resultingin A vacuum hose adapter is packed with sander Model No. possiblesedous injury.
-
Page 10: Sandpaper Selection
SANDPAPER SELECTION Flush sanding can be performedwith your sander. See Figure 9. Every side except the rear of your sander allows selecting t hecorrect sizegdtandtypesandpaper is flush sanding in comers. Always remove sander from extremely importantstep in achievinga high quality workplece before turning your sander off. - Page 11 EXTENSION CORDS _IL WARNING: When servicing use only Identical Craftsmen replacement parts, Use of any other The use of any extension cord willcause some loss of parts may create a hazard or cause productdamage. power. To keep the loss to a minimum and to preventtool from overheating,use an extension cord that is heavy GENERAL enough to carry the current the tool will draw.
-
Page 12: Warranty
If this rRRFrSNRN Sander fails to give completesatisfactionwithin one year from the date of purchase, RETURN IT TO THE NEAREST SEARS STORE IN THE UNITED STATES, and Sears will repair it, free of charge. If this CRAFTSMAN Sander is used for commercial or rental purposes,this warrantyapplies for only 90 days from the date of purchase. - Page 13 NOTES:...
- Page 14 CRAFTSMAN SANDER - MODEL NOS. 315.116310 AND 315.116320 SEE NOTE "A" PAGE 15 L--_7...
-
Page 15: Parts List
CRAFTSMAN SANDER - MODEL NOS. 315.116310 AND 315.116320 The modelnumberwillbe found on a plate attaohodtothe motor housing,Alwaysmention the model number in all correspondence regardingyour SANDER or when orderingrepair parts. SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS PARTS LIST Part Number Description Quan. - Page 16 For in-home major brand repair service: Call 24 hours a day, 7 days a week 1-800-4-MY-HOME s" (1-800-469-4663) Para pedir servicio de reparacibn a domicilio - 1-800-676-5811 In Canada for all your service and parts needs call - 1-800-665-4455 Au Canada pour tout le service ou les pi_ces For the repair or replacement parts you need: Call 6 am - 11 pm CST, 7 days a week...