Problem Solving - Eureka 7600 Series Owner's Manual

PROBLEM SOLVING

NOTE: Turn off the switch and unplug the electrical cord before servicing.
PROBLEM
Motor will not start.
Does not clean the
carpet.
No suction at the
end of the hose.
Motor suddenly
shuts off.
Headlight not
working.
Noise from the
brush roll area.
Cleaner is hard
to push.
Brush roll will not
turn.
Burning smell.
Cleaning height
knob will not turn.
Missing parts
Questions?
12
CAUSE
Electric Plug
Disposable Dust Bag
Belt
Brush Roll
Hose
Hose Converter
Disposable Dust Bag
Hose
Attachment Door or
Hose Connection on
Base.
Thermal Cut-Off
Light Bulb
Brush Roll
Belt
Cleaner Height Setting
Belt
Belt
Belt
Cleaner Height Setting
SOLUTION
Push plug securely into outlet.
Try another outlet.
Check circuit breaker.
Change the bag. Hint: If picking up fine dust, the bag may
not look full but a fine substance tends to reduce suction
when it blocks the airflow through the paper bag.
Replace a cut, loose or out of shape belt.
Clean hair and thread from bristles and end cap area.
Replace brush roll if bristles are worn.
Remove any clogs from the hose that restrict the airflow.
Hose converter has to seat inside the attachment door.
Hint: Place converter notch to the back of the cleaner.
Change the bag. Hint: If picking up fine dust, the bag may
not look full, but a fine substance tends to reduce suction
when it blocks the airflow through the paper bag.
Remove any clogs from the hose that restrict the airflow.
Check both ends of the hose.
Remove bottom plate and clean debris from the
attachment door area or around the hose connection.
Refer to page 5.
Replace light bulb.
Remove bottom plate and clean debris from the brush
roll area.
Replace a cut, loose or out of shape belt.
Turn adjustment knob to a higher position. Hint: Put handle
in operating position. Tilt the cleaner back to raise the
front wheels off floor Then turn the knob.
Replace cut, loose or out of shape belt.
Replace cut, loose or out of shape belt.
Replace cut, loose or out of shape belt.
Hint: Put handle in operating position. Tilt the cleaner back
to raise the front wheels off floor. Then turn the knob.
Call 1-800-438-7352 between 8:00 am and 4:45 pm
cental standard time, Monday through Friday. Know the
model and serial numbers when you call.
Call 1-800-282-2886, 7 am to 8 pm, central standard
time, Monday through Saturday. Know the model and
serial numbers when you call.