Changing The Wash Cycle Options - Fisher & Paykel AquaSmart WL26C Installation Instructions And User Manual

Changing the wash cycle options
1 Select the wash option you wish to modify, highlight it by touch[ng the SELECT button.
Regular w ash
X FRSTSPmN
Scroll to the appropriate setting and press SELECT.This will highlight your choice to show you
that ]t has been selected.
F-
TEMP
3 You will then be given the option whether to save this modified option for future washes or to
just use it for this one. [f you select Save for Future Washes, the washer will save the changed
wash option for that cycle only. (Please note: This option ]s not available for the Delay Start, Drip
Dry or Bleach selections).
4 Press SELECTto select,
B You will then return to the main wash options screen.
6 Touch START/PAUSE or SELECT to begin the wash.
Note: If you wish to change any of the wash options while your AquaSmart r_'is running please
press START/PAUSE then change the required option.
Auto Drain
Unsupervised clothes washers filled with water can present a drowning hazard to small children.
In order to minimize any risk of this type of accident, your AquaSmart _' has been
pre-programed to know when this hazard ]s created, and drain the wash water to a safe level.
If you pause your AquaSmart _' at any time d urJng the wash cycle when there is water in the tub,
the washer will activate the AUTO DRAIN function after 3 minutes. This will drain the water ]n the
wash tub to an acceptable level, removing any potential hazard.
A warning message will be displayed to warn you prior to AUTO DRAIN being activated and the
washer will beep as ]t drains.