Eureka 2940 Series Owner's Manual page 16

16
FIG. 27
FIG. 28
FIG. 29
Screw
Vis
Tornillo
FIG. 30
ENGLISH
PERIODIC MAINTENANCE
CAUTION: Turn off the switch and unplug the electrical cord before
periodic maintenance.
How to Change Lightbulb
Step 1: Lower handle to floor to change lightbulb (FIG. 27).
Step 2: Remove bottom filter cover and filter (FIG. 28 & 29).
Step 3: Remove screw from lens cover (FIG. 30).
Step 4: Pull old lightbulb out of socket.
Step 5: Push new lightbulb into socket.
Step 6: Replace lens cover.
Step 7: Secure with screw.
Step 8: Return vacuum to upright position.
Note: Use GENUINE EUREKA replacement lightbulb. Part No. 57940-2.
(CONTINUED)
(continued)