A
CONNECT
SHIFT ROD (See Fig. 6)
=
insert end of shift rod into hole of shift lever indicator_
•
insert hairpin clip through hole of shift rod to secure.
INSERT CABLE CLIP (See Fig. 7)
•
Insert plasticcable clip into hole on the back of handle
column. Push cables into clip,,
SHIFT
HAIRPIN
SHIFT
CLIP
LEVER
INDICATOR
HANDLE
COLUMN
CABLES
CABLE CLiP
FIG. 6
FIG. 7
REMOVE TILLER FROM CRATE
•
Make sure shift lever indicator is in "N" (neutral) posi-
tion (See Fig. 6)
•
Tilt tiller forward by lifting handle_
•
Rotate tiller handle to the right and pull tiller out of
carton.
CHECK TIRE PRESSURE
The tires on your tiller were overinflated at the factory for
shipping purposes.
Correct and equal tire pressure is
important for' best tilling performance.
•
Reduce tire pressure to 20 PSi°
HANDLE HEIGHT
•
Handle height may be adjusted to better suit operator_
(See 'q'O ADJUST HANDLE HEIGHT" in the Service
and Adjustments section of this manual)=
8