BLY
CONNECT
SHIFT ROD (See Fig. 6)
,,
Insert end of shift rod farthest from bend into hole of
shift lever indicator,.
=
Insert hairpin clip through hole of shift rodto secure,
•
Insert other end of shift rod into hole in shift lever°
-
Insert second hairpin clipthrough hole of shift rod.
ATrACH THIS
END TO SHIFT
\
SHIFT ROD
ATTACH THIS END
TO SHIFT LEVER
H/IJRPIN
CUP
SHIFT
LEVER
INDICATOR
SHIFT
HNRPIN CLIP
SHIFTLEVER
FIG. 6
SHIFT ROD
REMOVE TILLER FROM CRATE
•
Make sure shift lever indicator is in "N" (neutral) posi-
tion (See Fig. 6)
•
Tilt tillerforward by liftinghandle, Separate cardboard
cover from leveling shield,
°
Rotate tiller handle to the right and pull tiller out of
carton.
INSERT CABLE CLiP (See Fig. 7)
•
Insertplastic cable clip intohole on the back of handle
column, Push cables into clip.
FIG. 7
CHECK TIRE PRESSURE
The tires on your unit were overinflated at the factory for
shipping purposes,
Correct and equal tire pressure is
importantfor best tilling performance.
°
Reduce tire pressure to 20 PSI.
HANDLE HEIGHT
Handle height may be adjusted to better suit operator_
(See WO ADJUST HANDLE HEIGHT" in the Service
and Adjustments section of this manual)°
8