Surface Cooking
US(NGTHE WOK STAND
m
m
m
m
m
m
m
m
[]
m
m
m
m
m
m
m
m
[]
m
m
[]
The Wok Stand provided with your cooktop is designed to allow round-bottomed woks to be
used. It is recommended
that you use a 14 inch diameter (35.5 cm) or less Wok. It is
recommended that you use the right front POWER burner with the wok stand for best
performance. If properly positioned, the Wok Stand will not slide off the grate.
il
To Properly Position the Wok Stand:
With the grate in position over the burner, set the Wok Stand on top of the grate positioning the
notches in the Wok Stand over the cooktop grate fingers (See Figure 1).
Figure 1
Flat-bottom
woks with large flat bottoms may also be used on your cooktop Surface
Burner Grates without the Wok Stand (See Figure 2). Insure the stability of the flat-bottom
wok before cooking without the Wok Stand. If unstable, DO NOT use the flat-bottom wok
without the Wok Stand.
Round-bottom
woks (with a support
ring)
should NOT be used (See Figure 3). The
supporting ring was not designed for proper or stable use on the Surface Burner Grates.
Proper use of flat-bottom wok
on Surface Burner Grate
Figure 2
Improper use of round-bottom wok
on Surface Burner Grate
Figure 3