Delta BS150LS Instruction Manual page 2

IMPORTANT SAFETY INSTRUCTIONS ........................................................... 2
SAFETY GUIDELINES = DEFiNITiONS ........................................................... 3
GENERAL SAFETY RULES .................................................................... 4
ADDITIONAL SPECIFIC SAFETY RULES ......................................................... 5
FUNCTIONAL DESCRIPTION .................................................................. 7
CARTON CONTENTS ......................................................................... 7
ASSEMBLY ................................................................................. 8
OPERATION ............................................................................... 12
TROUBLESHOOTING GUIDE .................................................................. 20
TROUBLESHOOTING ........................................................................ 22
MAINTENANCE ............................................................................. 23
SERVICE .................................................................................. 23
ACCESSORIES ............................................................................. 23
WARRANTY ................................................................................ 24
FRAN_AIS ................................................................................. 25
ESPA_IOL .................................................................................. 47
Read and understand all warnings and operating instructions before using any tool or equipment.
When using tools or equipment, basic safety precautions should always be followed to reduce the risk of
personal injury. Improper operation, maintenance or modification of tools or equipment could result in serious
injury and property damage. There are certain applications for which tools and equipment are designed. Delta
Machinery strongly recommends that this product NOT be modified and/or used for any application other than
for which it was designed.
if you have any questions relative to its application DO NOT use the product until you have written Delta Machinery
and we have advised you.
Online contact form at www.deltamachinery.com
Postal Mail: Technical Service Manager
Delta Machinery
4825 Highway 45 North
Jackson, TN 38305
(IN CANADA: 125 Mural St. Suite 300, Richmond Hill, ON, L4B 1M4)
Information regarding the safe and proper operation of this tool is available from the following sources:
Power Tool Institute
1300 Sumner Avenue, Cleveland, OH 44115-2851
www.powertoolinstitute.org
National Safety Council
1121 Spring Lake Drive, Itasca, IL 60143-3201
American National Standards Institute, 25 West 43rd Street, 4 floor, New York, NY 10036 www.ansi.org
ANSi 01.1 Safety Requirements for Woodworking Machines, and the U.S. Department of Labor regulations www.osha.g£y
SAVE THESE INSTRUCTIONS!