Example: Power Save Time
To change the time interval for the printer to wait before going
into Power Save mode (default setting is 5 MIN):
1. Press + to enter the menu mode.
2. Press + and/or – repeatedly until you see
SYS CONFIG MENU
3. Press ENTER to go into the Sys Config Menu.
POW SAVE TIME
XX MIN
4. Press ENTER to select the Power Save Time item.
The value on the second line of the display begins
flashing.
POW SAVE TIME
X MIN
5. Press + repeatedly until the interval (e.g., 240 MIN) you
wish to select appears on the second line.
POW SAVE TIME
XX MIN
6. Press ENTER to select the new setting:
An asterisk appears on the second line of the display.
POW SAVE TIME
XX MIN
7. Press ON LINE to engage the new setting and to exit the
menu.
The printer returns to standby mode.
*
*
*
MPS6150c User's Guide
90