Usb Menu; Network Menu - Oki MPS6150c User Manual

USB Menu

Note: Factory default settings are shown in bold.
Item
SOFT RESET
SPEED
SERIAL
NUMBER

Network Menu

Note: Factory default settings are shown in bold.
Item
TCP/IP
NETBEUI
IP ADDRESS
SET
IP ADDRESS
SUBNET MASK
GATEWAY
ADDRESS
Factory Default
Settings
ENABLE
DISABLE
480Mbps
12Mbps
ENABLE
DISABLE
Settings
ENABLE
DISABLE
ENABLE
DISABLE
AUTO
MANUAL
xxx.xxx.xxx.xxx
Default =
198.168.100.100
xxx.xxx.xxx.xxx
Default =
255.255.255.000
xxx.xxx.xxx.xxx
Default =
192.168.100.254
[EXECUTE]
MPS6150c User's Guide
Explanation
Enables or disables the SOFT RESET
command.
Sets the maximum transfer speed
for the USB interface.
ENABLE allows your computer to
identify the printer by its USB
interface serial number.
Explanation
Enables or disables this network
protocol.
Enables or disables this network
protocol.
Change this to Manual to specify the IP
address through the front panel (see
next entry). Required for non-DHCP
networks.
Current assigned IP address. To
change:
• Press ENTER.
+ –
• Use / keys to increment first
octet.
• Press ENTER to move on to the next
octet.
• Repeat for each octet.
• Press ENTER to register the new
address.
Current assigned subnet mask. To
change, proceed as above.
Current assigned gateway address. To
change, proceed as above.
Initializes the network card.
97