Oki MPS6150c User Manual page 129

Warning! If the printer has been printing, the fuser
will be HOT!
If the sheet is well advanced into the fuser (only a
short length is still visible), do not attempt to pull
it back. See step 4 under "Jam 382" .
To remove a sheet trapped in the fuser:
1. Grasp the edge of the sheet.
2. Push the fuser pressure release lever (1)
towards the front and down.
3. Lift out the sheet.
4. Let go of the fuser pressure release lever.
c53_64_jambelt2.jpg
NOTE
MPS6150c User's Guide
129