Check The Printer Settings; Duplex Mode; Power Save Mode; Printer Emulation - Oki C9200 Setup Manual

18

Check the Printer Settings

Power Save Mode

The printer is set at the factory to enter the Power Save
mode after 1 hour. You can change this setting to 5, 15,
30 or 240 minutes.
To change the interval:
□ Press MENU repeatedly until
MENU appears on the display.
□ Press ITEM + repeatedly until
appears on the display.
TIME
□ Press VALUE (+ or -) repeatedly until the desired
setting appears on the second line of the display.
□ Press SELECT.
An Asterisk (*) appears next to the new setting.
□ Press ON LINE to save the setting and exit the menu.
28
SYSTEM CONFIG
POWER SAVE DELAY

Duplex Mode

!
If you experience curling when printing a file in
duplex mode, switch to 28-lb. US Bond paper.
If your printer is equipped with a duplex unit and you
want duplex printing to be the printer default:
□ Press MENU repeatedly until
on the display.
□ Press ITEM + repeatedly until
the display.
□ Press VALUE +.
ON will appear on the second line of the display.
□ Press SELECT.
An Asterisk (*) appears next ON.
□ Press ON LINE to save the setting and exit the menu.

Printer Emulation

The printer is set at the factory to automatically detect the
emulation of an incoming print job. To change it to
always be PCL or Adobe PostScript, see "Setting the
Emulation" under Control Panel, Walk-up Functions in
the on-line C9000 Series User's Guide.

Display Language

If you wish to choose a display language other than
English, see "Setting the Control Panel Display
Language" under Control Panel, Walk-up Functions in
the on-line C9000 Series User's Guide.
PRINT MENU appears
appears on
DUPLEX