Appendix A - Display Panel Messages - Oki C910 User Manual

Appendix A – Display Panel
Messages
The display panel messages are intended to be self-explanatory.
Representative messages are given as examples below.
Message
Ready to Print
Printing tttttt
tttttt Near End
cccccc Toner Low
Fuser Unit Near
Life
Change Fuser Unit
Inverter is
Removed
Invalid Data
Press ONLINE
Button
Change Paper in
tttttt
mmmmmm
pppppp
Press ONLINE
button
Please see HELP
for details
Install Paper
tttttt
mmmmmm
Please see HELP
for details
92
– C910 Appendix A – Display Panel Messages
Explanation
Your printer is online and ready to print.
Your printer is printing and paper is currently being
fed from tttttt, where tttttt identifies a tray.
The paper supply in the tray identified by tttttt will
run out soon.
The remaining toner of color cccccc is running low.
The fuser unit is nearing the end of its working life.
The fuser unit has reached the end of its working life
and has to be replaced.
The optional Inverter unit has been separated from
the printer and all Finisher functions are disabled.
Invalid data has been received by the printer.
Press the ONLINE button to clear this warning.
There is a mismatch between the media in the tray
and print data.
Load media of size mmmmmm and type pppppp into
tray tttttt. The message may remain for some time
after you have closed the tray.
You can have the printer ignore this error for the
current print job by pressing the ONLINE button.
You can access help details by pressing the HELP
button.
The printer has tried to take paper from an empty
tray.
Load media of size mmmmmm into tray tttttt. The
message may remain for some time after you have
closed the tray.
You can access help details by pressing the HELP
button.