1050 Memory modules
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 58
•
"1040 Bottom slot cover" on page 61
Removal steps of memory modules
Note: If only one memory module is used on the computer you are servicing, the card must be installed in
SLOT-0 (
a
: lower slot), but not in SLOT-1 (
When installing: Insert the notched end of the memory module into the socket. Press the memory module
firmly, and pivot it until it snaps into place. Make sure that it is firmly installed in the slot and does not
move easily.
62
Hardware Maintenance Manual
b
: upper slot).
b
a